JD 2140 sg2 rockshaft acting up

Posted by Aussietractor on June 06, 2005 at 20:04:14 from (139.168.76.107):

Here's one for all the hydraulic gurus out there. I,m having trouble getting the three point linkage [TPL} to "float" properly.According to the JD owners manual to get the TPL to float the rockshaft selector is placed in the minimum position and push the rockshaft control lever all the way forward.

As soon as I push the rockshaft selector to minimum the TPL raises to full height no matter which position the rockshaft control lever is in [ie raise or lower].

I can get the TPL to partially float by placing the rockshaft selector lever in the maximum position and placing rockshaft control lever in the forward [lower] position.

Having said that the rockshaft selector lever seems to be operating in a reverse mode. Anyone got any ideas on this?

Follow Ups:

• Re: JD 2140 sg2, rockshaft acting up Aussie tractor 17:03:15 06/07/05 (2)
  • Re: JD 2140 sg2, rockshaft acting up david val 05:19:34 06/08/05 (1)
    • Re: JD 2140 sg2, rockshaft acting up Aussietractor 15:25:12 06/08/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]