Re: 311 hayliner, timing out again!!!

Posted by RickB on June 05, 2005 at 16:15:43 from (205.231.146.217):

In Reply to: 311 hayliner, timing out again!!! posted by Hurst on June 05, 2005 at 16:08:54:

You are supposed to remove shims to tighten the knotter stack, not add them. Are you pulling the knotters back against the trip pawl before checking the timing? If not, you are probably out of time and don't know it. Start by checking and if necessary correcting the knotter home position. Is the knotter drive chain snug? You didn't remove a link from the knotter drive chain, did you? Are you gonna track down a book for this machine on Monday?

Follow Ups:

• Re: 311 hayliner, timing out again!!! TimS 09:02:40 06/06/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]