Re: roadgoing lug tires

Posted by MSM on June 05, 2005 at 13:33:24 from (4.155.232.87):

In Reply to: roadgoing lug tires posted by Aussietractor on June 05, 2005 at 02:08:22:

Go with an industrial type tire. They are made for combination road/field work and wear well. They are a harder rubber and heavier ply which for your bush hogging work would be to your advantage. They will not cut as easily,they usually turn thorns and bramble stickers,and aren't quite as agressive tread tread wise so you won't tear up ground on sharp turns.Reversing the tire only works on a rotating or non drive load(trailer,grain cart, etc) They will wear just as quickly,just with a different pattern on a drive application. As you road a tire,they tend to "grow" due to centrifical force,putting more wear on the center,adding more air will accelerate the center wear by forcing the center out even more.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]