Re: NH 311 hayliner knotters

Posted by KEH on June 02, 2005 at 17:01:53 from (64.53.73.55):

In Reply to: NH 311 hayliner knotters posted by Hurst on June 02, 2005 at 16:10:00:

Not sure I understand your problem enough to give complete advice, but the first thing you need to do is check the timing of the knotter drive as well as the plunger. Read the manual and if you don't have a manual get one before working on it. The little gear you mention may be held in place by a roll pin and it may be broken. The NH knotters I am familiar with have a bolt at the back which , when taken loose, allow the individual knotter to be rotated out so it can be worked on. Hope this helps.

KEH

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]