Re: steel wheels for john deere A

Posted by JPatton on May 01, 2005 at 07:23:33 from (69.76.159.207):

In Reply to: steel wheels for john deere A posted by Bryantt Bolduc on April 30, 2005 at 10:09:41:

Bryant - You MIGHT be able to use your current hubs. Are both sets of wheels set up for the "replaceable" hubs? These are the one with a clamp or collar that slips onto the hub and uses 3 bolts to tighten it down. There ar 6 bolts that secure the wheel to the hub. If so, you can interchange the wheels using your hubs. This type hub was used on steel wheels, flat spokes with rubber and the heavy cast iron wheel centers for rubber tires. The other 10 spline hub just slides onto the axle and the wheel fits over the tapered portion of the hub to act as a clamp. These also have 6 bolts that secure the wheel to the hub, but remember there is no clamp. These are interchangeable only with that type of wheel. This style hub was not available for use with the heavy cast center but was used wilth the F&H style flat spoke and round spoke wheels for both rubber and steel.

Hope this helps.

J

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]