Re: Small Engine Problem

Posted by JT on April 28, 2005 at 19:22:48 from (69.220.202.228):

In Reply to: Small Engine Problem posted by Toroman on April 28, 2005 at 11:07:21:

A few things to check.
Make sure it is not over full on oil
Did you turn it on its side to sharpen the blade? If you do, make sure you turn it with the air filter up, dipstick tube down.
Is the air filter new or is it old and used, if it is used, could be plugged up. This could casue it to draw oil out of breahter.
Check your dipstick o rings and make sure they are not broken or missing.
If this does not help, email me and I will see if I can help
No, you did not break a ring in storage, that cannot physically happen with out some piston movement.
Lastly, is this an OHV engine? it might be a blown head gasket, never have seen one on the 6.5, but it is always possible.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]