Re: two point hitch adpator to three point hitch

Posted by BillWV on April 21, 2005 at 09:48:58 from (129.71.139.205):

In Reply to: two point hitch adpator to three point hitch posted by Ben Kudwa on April 19, 2005 at 13:29:46:

I have a '53 Super C with Fast Hitch to 3-point adapter. It consists of 2 prongs that insert into the Fast Hitch arms, and a bracket that bolts in place of the right angle PTO for a top link to attach. It works fine. The only drawback is implements have to be just the right width at the attaching pins to fit the prongs. But this is the setup that I plow with in the spring; and I've tried my 3ph finish mower and it works fine.

The link is to a picture from a Farmall brochure that shows the original factory 3ph adapter.

Good luck,
Bill

• Super C Fast Hitch adapter

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]