Re: need big spur gears

Posted by cdmn on April 12, 2005 at 19:38:38 from (66.228.228.80):

In Reply to: need big spur gears posted by cheinzle on April 12, 2005 at 12:35:48:

You don't give us any information that would be needed to work with, except "like in an axle reducer". Look for an old Allis Chalmers or an old Farmall. If you want something bigger, look for a New Holland Super 77 haybaler. Or the ring gears from an old road grader. If you want something smaller, look for an old pump jack, or the agitator gears from an old washing machine. Maybe a flywheel ring gear and starter pinion are good enough for you.
There are lots of industrial supply dealers in surplus gearboxes on the net.
Designing and manufacturing precision gears requires the highest of talents, so everyone tries to avoid them and use belts and roller chains.

Follow Ups:

• Re: need big spur gears cheinzle 20:06:03 04/12/05 (1)
  • Re: need big spur gears paul 09:44:51 04/13/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]