Re: Zenith carb

Posted by NC Wayne on February 25, 2005 at 18:08:58 from (205.188.117.7):

In Reply to: Zenith carb posted by Brian Girard on February 25, 2005 at 14:03:39:

Your best bet is to contact Zenith directly. They can tell you who is the nearest distrubutor to you. They can also check their inventory for you and tell you if a kit is available at the factory in case the distrubutor doesn't have one in stock. I've been in the same boat you are several times ovet the past few years where I needed to identify an old carb and what kit went with it and the folks at Zenith have always been more than happy to help and answer any questions I had. They can usually even go so far as to be able to pull the print for a carb if you need it. Several weeks back I needed some info on the carb on about a 1956 year model D8 CAT and the lady was able to get a print for me even back that far.
Here is a link to their web site. Good luck.

• Zenith fuel systems

Follow Ups:

• Re: Zenith carb Brian Girard 23:33:40 02/25/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]