Re: In place crankshaft grinding?

Posted by Earl S. on February 16, 2005 at 06:31:44 from (64.12.117.7):

In Reply to: Re: In place crankshaft grinding? posted by Mike Burdick on February 15, 2005 at 09:56:40:

I have used both the Sunnen and the Winona.Clean up after grinding, inside the engine was a big factor.It was fun to learn how to grind. After that it was the worst job in the shop.I decided one day with water dripping under the car that was my last one.I was getting a slight electric tingle I stopped put a ground wire on the grinder finished the crank and went back to the shop owner and told him it was me or the grinder was going.That was the last the job for the old grinder.It was amazing how accurate it would grind you had to leave about .0005 to polish which you did by hand.No diesel cranks you couldnt put a radius on the stone.Earl In Illinois

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]