Re: Trailers

Posted by MIke (WA) on February 14, 2005 at 08:17:37 from (209.213.153.111):

In Reply to: Re: Trailers posted by dennis in nc on February 14, 2005 at 05:25:24:

If the trailer is 102" wide, the wheels have to be under, because 102" is the width limit for the whole rig. "Car trailers" with fenders on the outside typically are about 80" between the fenders. You can haul wider tractors, but its a PITA- you have to load from the front of the trailer, with the rear wheels of the tractor ending up in front of the trailer fenders (the front wheels will generally fit between the fenders)- which (on my trailer) involves taking off the jack, blocking up the front corners and using 2 X 12 ramp planks.

Follow Ups:

• Re: Trailers dennis in nc 08:48:05 02/14/05 (1)
  • Re: Trailers Mike (WA) 08:06:51 02/15/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]