|
Tractor Talk Discussion Board |
Re: oliver 77 intake and carburetor
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 770 on January 26, 2005 at 18:11:05 from (12.75.106.130):
In Reply to: oliver 77 intake and carburetor posted by monte sheets on January 25, 2005 at 21:05:42:
Yes it will. On one of my 77"s I put the intake from a 770 on along with the TSX 755 carb. A TSX 374 from a super will also fit. The 77 should have on the TSX 363. I"ve had good results with the 770 set up. On that tractor though, I had the head ported and polished..(a puller). Just remember, the ports on the 77 head are smaller than the super or 770 head. As info, the 1550 carb will also bolt up, a TSX 903....But they are harder to find. Don"t over fuel your tractor, I"d recommend if going to a larger carb, a larger intake is a must. Will probably be good for a few more horse. Good luck...Just my opinion....
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|