|
Tractor Talk Discussion Board |
Re: OT - Making a gravel drive through mud bowl, w
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by EngineerJoyce on January 14, 2005 at 09:51:32 from (199.149.115.24):
In Reply to: OT - Making a gravel drive through mud bowl, will posted by Kirk Grau on January 14, 2005 at 09:19:49:
Yep, you got it! Use the non-woven (looks like felt fabric) and get the real thick stuff (6 to 8 ounces per square yard). It's best to subgrade the drive. Just take the tractor and grader, and take off the topsoil about 4 to 6 inches. I keeps the rock from rolling away. You may also see about renting a walk behind trencher and bury some black perforated tile about a foot deeper on grade to drain that low spot. Not too deep, or those clay soils will slow down the infiltration. If you backfill with clean rock (without the fines) that would also speed up the water removal. It depends on the length you need to go on whether the walk behind trencher would work for you. BTW - have you visited your local Conservation District and gotten them to evaluate your problem? free technical advice. Ping if you have questions for me.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
WANTED Front grille/nose assembly for Massey Ferguson 1160 (also fits 1180 & 1190). Headlight-mount section. AGCO Grille 3706022M91 (supersedes 3705942M91), cover 3705494M1/M2, holders 3705501M91/3711158M92. New/NOS/good used OK. Jonesboro, AR - will pay shipping. Photo appreciated. Thanks
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|