Re: david brown hydraulics

Posted by kyhayman on December 27, 2004 at 18:46:05 from (152.163.101.7):

In Reply to: david brown hydraulics posted by allenmichael on December 27, 2004 at 15:45:26:

Lots of things could be going on here, Elmer, over on the Case Board is the guru of DB's. Try posting over there, he's forgotten more about these than most folks ever know.

Water can be a real problem on these. Shifter boots leak, top cover lets water in if seal is bad (seam right under seat). If you have water in it and a loader, need to blow out the lines to get it out (been there, done that). I'd keep the pressure filter, these hydraulic systems are more pickey than most.

Stiff clutch is just cold grease (clutch runs dry in a 1210). At 10 degrees F, I warm mine up for 20 mins before use at 1400 rpm to warm the oil before moving the hydraulics.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]