|
Tractor Talk Discussion Board |
Re: OT: Tips/ideas for pole barn, do's/dont's.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by thejdman01 on December 26, 2004 at 18:50:50 from (152.163.101.7):
In Reply to: OT: Tips/ideas for pole barn, do's/dont's. posted by Markss on December 26, 2004 at 09:07:03:
i know this is way off the pole barn idea but in the way of cheap the ideas i have seen that worked well and w/very minimal cost a local develper near chicago bought a grain elevator and 200 acres and was going to demolish the bins and just take the tin to scrap and bury the cement what was done was the bins were used as halves and pere put upside down as the roof the floor was poured concrete with I____I 5 foot sides to help make the rings sit up higher and give the shed more height and for some beer bolts and the cement along w/a lttle sealer for the joints my neighbor got one heck of a nice shed for very very little cost as the contractor/developer told him if he was willing to take them down go for it as he didnt have to knock them down separate them haul the steel he jsut wanted them gone. he also ended up putting up plastic doors on the ends that let light in and they honestly keep it fairlly cool int he summer warm in the winter. the shed isnt heated but is sitll decnetly warm anything to get out of the wind is a benefit and for the cost of the bolts beer and sealer (now the doors he got a really nice shed for it i think. better then a 1/2 million dollar combine sitting outside and it is plenty tall enough to fit a combine in etc in the center. only downside is it gets less height as it goes towards the wall but you just keep the bailer, tractors disc, etc to the ouside. i dont know if you were looking for a shop or not but if jsut storage its great cheap storage.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
1938 John Deere LI
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|