Re: GMC/Chevy

Posted by buickanddeerre on December 22, 2004 at 13:55:27 from (64.10.41.96):

In Reply to: Re: GMC/Chevy posted by Allan in NE on December 22, 2004 at 12:53:31:

The tilt steering on my GN did the same thing.
Had to work under the steering lock, cruise/wiper/high low beam linkages after they were removed. The tilt pins were special. The accessable one pulled easy but the other I finally drove out with a punch instead of pulling it.
Tightened the three screws with locktite after shoving the steering together again. Worked for two days than the steering lock linkage came undone. Gave up and had the local GM trained mechanic with the proper tools repair it in less than an hour. Had to go all the way to the bottom again. I wasted 1/2 a day and alot of temper.

Follow Ups:

• Re: GMC/Chevy Allan in NE 14:14:57 12/22/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]