Re: Opinions-Avg hours before overhaul?

Posted by Allan in NE on December 15, 2004 at 13:05:08 from (148.63.132.164):

In Reply to: Opinions-Avg hours before overhaul? posted by CEB on December 15, 2004 at 12:50:09:

CEB,

Crankshaft bearings need to be looked at and probably replaced at 5,000 hours. The rest of 'er will more than likely make that 10,000 hour mark fairly easily, if it is well maintained.

The crank is where the load shows up on an engine and more so on a diesel, because of their higher torque and lugging ability.

If you are using the tractor in tractor pulls, I'd check 'em at 10 to 15 minute intervals. :>)

Allan

Follow Ups:

• Re: Opinions-Avg hours before overhaul? valkerry 07:41:20 12/16/04 (1)
  • Re: Opinions-Avg hours before overhaul? thurlow 08:40:18 12/16/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]