Re: Can you repair a control valve?

Posted by DLM on November 28, 2004 at 18:59:29 from (204.118.157.61):

In Reply to: Can you repair a control valve? posted by Vern on November 28, 2004 at 16:10:30:

You should have two lift cyls. on that loader and you have to check each cyl. by it self becouse the barrel ends are tee together and the rod ends are tee together. Most loaders leaking down are caused by one or both cyls. But you could have a problem in the valve do you know if you have lift checks and circut relief valves eather one could be the problem. If you have a circut relief that is most likely the problem eather the valve is weak or the o rings that seal the valve inside Don

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]