Re: Can you repair a control valve?

Posted by Everett on November 28, 2004 at 18:02:47 from (68.43.218.246):

In Reply to: Can you repair a control valve? posted by Vern on November 28, 2004 at 16:10:30:

Vern
About the only thing you can do to repair the valve is to replace the O rings in the valve. That is if one can find the right ones. I replaced the valve on my 4000 with a Greshen open spool valve. Had to rework the plumbing somewhat but worked just fine.
If I had to do it again I would take the valve off then take it to a hyd place and match it as close as you could to the replacement valve. Could save some revamping.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]