Re: Making your own hard line hydraulic lines

Posted by cootbruce on November 24, 2004 at 08:19:18 from (24.213.27.142):

In Reply to: Re: Making your own hard line hydraulic lines posted by NC Wayne on November 23, 2004 at 20:29:57:

Thanks Wayne,

That is the information I was looking for...my problem..I live in Upper Michigan ( not at that end of the earth...but I can see it from here...) I can not find the fittings...I have called in a 100 mile radius and not found the tube fittings...I have been told to use soft hose fittings, cut the crimping section off and weld/then braze over the weld, the fitting to the tubing.....I can't even find a source for the fittings "on-line"

you gave me a lot of good information...thanks

bruce

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]