Re: Making your own hard line hydraulic lines

Posted by dlm on November 23, 2004 at 20:30:35 from (204.118.157.158):

In Reply to: Making your own hard line hydraulic lines posted by cootbruce on November 23, 2004 at 07:11:08:

Do it the correct way and make it look factory .
Go to your hyd. supply get the proper tubing and fitings. Most of your older hyd. lines used J I C fitings whitch were 37 deg. flair the flairing tool is a roller type and they make benders for the different size tube with the right bender you can make real short bends. Depending on your pres. you could use black pipe might have to go to sceg. 80 . But it won't look as nice. If you use pipe don't use cast fitings only steel.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]