Re: sherman transmission in an NAA -- Should I?

Posted by Ramrod on November 15, 2004 at 14:36:12 from (216.61.113.33):

In Reply to: sherman transmission in an NAA -- Should I? posted by Tom B. on November 15, 2004 at 13:51:33:

The Sherman Hi Low tranny is a great add on for the NAA, but you will need to fix your NAA tranny too. The Sherman uses the original tranny and adds a High and Low gear range to it, so you get 12 speeds instead of 4. To install it, you remove the input shaft that sticks in the pressure plate and clutch disc, and replace that with the Sherman. Of course you gotta split the tractor to do this...

John Smith's site has some good stuff on installing the Sherman.

Ramrod

Follow Ups:

• Re: sherman transmission in an NAA -- Should I? Ramrod 06:57:10 11/16/04 (0)
• Re: sherman transmission in an NAA -- Should I? Tom B. 21:05:26 11/15/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]