Re: International 350U Hydraulics problem

Posted by big fred on November 12, 2004 at 11:00:16 from (130.76.32.144):

In Reply to: International 350U Hydraulics problem posted by Briandurga on November 12, 2004 at 10:35:11:

You probably lost the prime in the lines to the pump. It happens to my 300U occasionally. What I do is remove the seat cushion, unscrew the reservoir vent then using a rubber tipped air gun I pressurize the reservoir to about 5 psi with the engine running. You can hear when the pump starts working again, as it loads the engine. Replace the vent, replace the seat cushion and you're good to go.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]