Re: I need some quick help

Posted by RAB on November 07, 2004 at 06:58:20 from (195.93.34.11):

In Reply to: Re: I need some quick help posted by Jrry on November 07, 2004 at 05:03:50:

JRRY. Why do you waste everybody"s time by not telling anyone what you have "supposedly" done before you post?
From your fiasco with the 1650, I would have thought that you might learn a little.
It seems you have not checked the motor on the bench, - and how do you measure how much power is available at the starter lead? Maybe you measured the volts on open circuit? What is the voltage at the starter motor(and at the battery terminal) when the starter switch is operated?
How many wires go to the starter. If it is just one direct from the battery with a mechanically operating contactor, there is patently no electrical interlock.
These are the things you should have done, even before coming to the forum, if you are smart enough to have already done all these other checks mentioned. If you have done all those things you would not be coming back with no information - Bigdog said early on "Have you checked the motor runs off the tractor using jumper cables" (direct to the battery, not from the battery leads).
Sorry if this is a bit abrupt, but.....

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]