Farmall H woes

Posted by PA Steve on October 15, 2004 at 06:53:59 from (205.188.117.10):

I'm working on a Farmall H that has not run well for a long time. I think the problem is isolated to improper valve timing. My father and I determined that all valve openings and closings were advanced approximately 20 crankshaft degrees. Because of this, we thought that the camshaft gear must be incorrectly aligned to the crankshaft gear. When the timing cover was removed, we found the marks on the camshaft and crankshaft gears correctly matched.
Is it possible that the marks on the camshaft or crankshaft gears are incorrect? If so, what is the correct setting. The tractor is a 1942 model, serial # 101071 X3
Any help or advice is greatly appreciated.

Follow Ups:

• Re: Farmall H woes ebbsspeed 08:12:10 10/15/04 (2)
  • Re: Farmall H woes PA Steve 16:31:30 10/15/04 (1)
    • Re: Farmall H woes wdTom 18:56:38 10/15/04 (0)
• Re: Farmall H woes Allan in NE 07:01:08 10/15/04 (2)
  • Re: Farmall H woes Allan in NE 07:02:14 10/15/04 (1)
    • Re: Farmall H woes RAB 07:54:24 10/15/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]