Re: farmall 450 fasthitch

Posted by RayP(MI) on October 12, 2004 at 16:58:57 from (216.46.210.144):

In Reply to: farmall 450 fasthitch posted by jerry zessinger on October 12, 2004 at 08:21:09:

Had the same problem with the 2pt/3pt conversion on my Farmall 200. Am using the one which consists of two arms inserted in the hitch wishbone, and a top link attached where the belt pulley assembly used to be attached to back of tractor. I couldn't get the post hole auger high enough to clear the ground for transport. Drilled another hole in the boom about 8" closer to tractor than existing hole(s). This allowed me to put post hole digger's wishbone frame in a vertical position, and got me several inches clearance between ground and end of auger.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]