Re: Clutch Problem Farmall Model A

Posted by john nelson on October 12, 2004 at 15:12:58 from (4.245.63.204):

In Reply to: Clutch Problem Farmall Model A posted by thynes on October 11, 2004 at 18:41:18:

I did a super A a couple of months ago and had the same problem, I think the new clutch facing is thicker than the original. I was able to adjust the clutch finger bolts enough to clear it, and it workes fine. I looked up through the inspection hole to make sure it had clearance afterward. I had turned the flywheel, rebuilt pressure plate and disc, with new throwout bearing.
John

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]