|
Tractor Talk Discussion Board |
Re: oil in ground
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tim B on September 09, 2004 at 10:20:13 from (68.162.218.211):
In Reply to: oil in ground posted by stan on September 09, 2004 at 01:25:54:
Stan, Firstly, don't tell anyone about the oil spraying if you can avoid it. Let who ever the city hires to do the work make their own decisions as to what problems they will be concerned with and look for. Aside from that; what's there is there. If something is found it will need to be dealt with in accordance with the oil and hazardous material regulations of your state. Don't be proactive at this point. They may not find anything, and if they do it may not be considered a problem that needs to be cleaned up. If your soils are "tight" (i.e., clayey with low permeabilty) the oil may have stayed near the soil surface (though is also may have moved overland with rain runoff). Oil is an organic material that certain bacteria will eat for lunch. If nutrients were available along with some warmth and moisture and the oil stayed near the surface there may not be much left after 15 years. Used oil has metals associated with it (lead, copper, chromium, cadmium) but unless there was some migration to a wetland or pond, or for some reason your used oil had unusually high levels of metals, the levels in soil resulting from that practice are not likely to be a signficant concern. Good luck.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Grain Threshing in the Early 40's - by Pat Browning. The setting is rural Wisconsin, halfway between East Troy and Elkhorn, on Hodunk Road, our nation was at war, and I was 6, 7 and 8 years old. George was our "threshing neighbor." He was the one with the threshing machine, a JI Case on steel wheels, and he pulled it to our farm with a JI Case standard tractor also on steel. In those days, steel wheeled implements were common. The roads were general gravel, so the lugs cutting into them wasn't a problem. George would set up the thresher, s
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|