Re: Hydralics and RPMs

Posted by Paul Janke on September 08, 2004 at 19:39:21 from (216.166.168.53):

In Reply to: Hydralics and RPMs posted by old on September 08, 2004 at 19:34:07:

Cylinders don't get weak, they just leak. Pumps wear out and need higher speeds to work in order to compensate for the internal slippage (oil leaking internally where it shouldn't) in the pump. Valves can also wear and have excess clearances, which could explain why only one circuit is not as it should be.

Follow Ups:

• Re: Hydralics and RPMs old 20:33:30 09/08/04 (1)
  • Re: Hydralics and RPMs RAB 22:59:07 09/08/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]