Plan B

Posted by buickanddeere on June 20, 2007 at 09:05:09 from (216.183.132.114):

In Reply to: Re: depends on the appplication most can be improved some posted by souNdguy on June 20, 2007 at 07:50:26:

Even higher current when initially switched on until the filament becomes incandescent and resistance increases to allow rated current. On the order of 10 times rated current for 100-200 ms
Rated lamp voltage, electrical system voltage and voltage drop in conductors will somewhat slant the wattages, current and degrees Kelvin.
I had a senior’s moment last night and missed posting the source for a LED conversions.
The lumens of a 35W incandescent with only 2.7W power consumption.
No heat to speak of that could melt plastic or discolor paint.
The LED’s could in some instances be a cost effective option to provide more light without electrical system upgrades.
LED's even allow “high output” dual headlights and a tail lamp on even a very old and modest powered electrical system.

http://www.ledtronics.com/markets/auto_index.htm

Replies:

• Re: Plan B souNdguy 09:28:48 06/20/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]