Re: 1936 John Deere A

Posted by msb on July 18, 2004 at 19:22:27 from (12.203.216.208):

In Reply to: 1936 John Deere A posted by Lee on July 18, 2004 at 17:24:45:

Depends on where and how it is broken off.IF a nut can be welded to it ,that would be the best way unless it wasn't stress bent before it was broken off and is pushing hard against the threads.In that case,I would try a left handed dril bit on it and then use a easy out if the bit didn't back it out.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: 1936 John Deere A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]