Seal ???

Posted by Kens640 on July 05, 2004 at 19:46:29 from (4.10.37.57):

I know this makes me sound dumb but where's the seal that you replace so that oil doesn't get on the clutchplate ? Years ago , I had a Sherman tranny put in my 640 & a week later I had to have it resplit to replace a seal because I lost my new clutch due to oil . The repair shop owner & mechanic said they didn't know I wanted the seal replaced . I was very unhappy & broke due to their stupidity . Now I'm rebuilding a 52 8n Funk & I sure don't want that problem again . This is my very first attempt at doing it all myself . I figure why pay that dummy to screw up at my expense if I can do it myself . Hee hee . I'm also installing a sherman hi/lo in this tractor too . The seal's been replaced in it by Rippee Tractors parts . So if there's another seal somewhere please help me . Maybe send me apics of it's location . I've rebuilt the 6 cyl engine completely too so it has all new seals . Bored out at .060 ; can't wait to hear it purr .Thanks in advance . Ken C.

Follow Ups:

• Re: Seal ??? Burrhead 02:21:06 07/06/04 (1)
  • Re: Re: Seal ??? Kens640 08:03:08 07/06/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Seal ??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]