Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Seal ???

Welcome Guest, Log in or Register
Author 
Kens640

07-05-2004 19:46:29




Report to Moderator

I know this makes me sound dumb but where's the seal that you replace so that oil doesn't get on the clutchplate ? Years ago , I had a Sherman tranny put in my 640 & a week later I had to have it resplit to replace a seal because I lost my new clutch due to oil . The repair shop owner & mechanic said they didn't know I wanted the seal replaced . I was very unhappy & broke due to their stupidity . Now I'm rebuilding a 52 8n Funk & I sure don't want that problem again . This is my very first attempt at doing it all myself . I figure why pay that dummy to screw up at my expense if I can do it myself . Hee hee . I'm also installing a sherman hi/lo in this tractor too . The seal's been replaced in it by Rippee Tractors parts . So if there's another seal somewhere please help me . Maybe send me apics of it's location . I've rebuilt the 6 cyl engine completely too so it has all new seals . Bored out at .060 ; can't wait to hear it purr .Thanks in advance . Ken C.

[Log in to Reply]   [No Email]
Burrhead

07-06-2004 02:21:06




Report to Moderator
 Re: Seal ??? in reply to Kens640, 07-05-2004 19:46:29  
with a new input shaft seal already in the replacement you must be talking about the engine's rear main seal



[Log in to Reply]  [No Email]
Kens640

07-06-2004 08:03:08




Report to Moderator
 Re: Re: Seal ??? in reply to Burrhead, 07-06-2004 02:21:06  
If that's it , I already did that in the rebuild kit . But I thought the repair shop said a seal in front of the 4 speed transmission .When I slid the Sherman onto the splined shaft of the regular trans I didn't notice a seal before hand .Before I bolt the motor on, I want to be sure .Thanks , Ken C



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy