Re: starter rotation

Posted by Bob M on June 10, 2004 at 12:01:46 from (165.170.128.66):

In Reply to: starter rotation posted by steve on June 10, 2004 at 06:58:27:

There’s really no “easy” way. You could accomplish it by removing the rear cover (carries the brush holders), rotating it exactly 90 deg and putting it back on. But this requires rerouting/reconnecting the heavy copper bus straps between the field windings and the ungrounded brusholders, drilling new holes in the cover for the thru bolts and probably grinding off a locating pin. Keep in mind you’ll also need a complete new starter drive (either bendix or overrunning clutch assembly) for the opposite rotation.

You’re probably better off buying the right starter - and maybe trade the one you’ve got as core...

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: starter rotation Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]