Re: using epoxy to attach new brake linings

Posted by Ron on June 09, 2004 at 01:25:31 from (69.179.2.158):

In Reply to: using epoxy to attach new brake linings posted by jeffpapier on June 08, 2004 at 08:23:45:

You don't have the time to hunt down the right rivets? Wow, that's truly scary.

Ignore any advice about using expoxies. J&B Weld, for example, burns off and turns into dust at 650F. The actual bonding adhesive used on all brakes and clutches is not an epoxy. It is a industrial bonding adhesive that is set by both pressure and heat and for those reasons is not available to the consumer. Once set, it retains its strength to beyond 2,000F, a temperature which is commonly seen in brakes and clutches.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: using epoxy to attach new brake linings Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]