Re: Re: Wet Sanding Gas Tank And Fenders

Posted by Sterlclan on May 02, 2004 at 18:32:24 from (63.114.222.107):

In Reply to: Re: Wet Sanding Gas Tank And Fenders posted by Bus Driver on May 02, 2004 at 18:14:07:

If you are just buffing them out start with 1000 grit wet paper use some dish soap in the water and use plenty of it scuff with 1000 and switch to 1200 or 1500 plenty of water and when buffing let the buffer run OFF the edges not into them (itll burn the edges quick )if you are concerned about burning the edges use masking tape on them and buff by hand a good soft block also helps get it at the autobody supply go easy and itll work out fine.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Wet Sanding Gas Tank And Fenders Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]