Re: Removal Of PTO shaft Massey Fergerson TO30

Posted by Duner Wi on April 26, 2004 at 05:26:26 from (63.50.8.75):

In Reply to: Removal Of PTO shaft Massey Fergerson TO30 posted by Richard Brown on April 25, 2004 at 22:27:54:

Remove the 4 bolts and shaft assembly should pull out with the retainer. Only time I know of when this won't work is if the shaft is twisted by the pump and the splines won't slide thru. If such is the case you may have to torch the shaft off inside the tractor nad remove the hyd. pump. Search the archives on the Ferguson and 9N Ford boards or repost your question on the Ferguson board. Good luck.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Removal Of PTO shaft Massey Fergerson TO30 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]