Removal Of PTO shaft Massey Fergerson TO30

Posted by Richard Brown on April 25, 2004 at 22:27:54 from (205.188.116.78):

I have a Massey Fergerson TO30 Tractor with a leaking PTO shaft seal.I have a IT shop manual which idicates that after unbolting the bearing retainer the shaft, and the retainer should pull out.

I am only able to pull the shaft out about 1.5 inches, and then it stops.

Can anyone advise me as to how to remove this shaft and retainer. Oh, and the original shaft has a 1-3/8 PTO adapter pinned to it. There is a relife in the bearing retainer that permits one to see the pin holding the adapter.

Can anyone give me some advice as to how to remove this shaft, and retainer?

Thank You very much.

Richard Brown

Follow Ups:

• Re: Removal Of PTO shaft Massey Fergerson TO30 Duner Wi 05:26:26 04/26/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Removal Of PTO shaft Massey Fergerson TO30 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]