Re: Re: pto on a 1961 ford 901 model 961

Posted by paul on April 20, 2004 at 11:39:01 from (66.60.196.128):

In Reply to: Re: pto on a 1961 ford 901 model 961 posted by Bob on April 20, 2004 at 11:15:08:

This just came up in the Ford section - yes a x6x Ford has the 2-stage clutch.

First, is your clutch pedal in the 'up' setting so it is all the way up? There is a clevis with 2 holes that pins to the clutch pedal, one setting makes the clutch lower & easier to use, but doesn't let you use the pto. The other setting raises the pedal a lot, & lets the pto clutch disengage. You need to push the clutch pedal all the way to the foor for the pto clutch to let go.

Otherwise, your pto clutch could be frozen, or something worn out.

--->Paul

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: pto on a 1961 ford 901 model 961 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]