Re: teeth on flywheel

Posted by John *.?-!.* cub owner on April 12, 2004 at 19:35:51 from (66.112.43.33):

In Reply to: teeth on flywheel posted by Bill from seneca , il on April 12, 2004 at 19:26:23:

Bill, you can easily do it yourself with a 4 or 4 1/2 inch hand grinder. The teeth will only be worn in 2 places opposite each other, and you can easily reshape them to approximately match the adjacent teeth. I reground the teeth on my 48 working cub about 9 years ago, and it has been working great ever since. Also check the teeth on the starter drive, they get blunt also. You can also remove the ring gear from the flywheel and rotate it 1/4 turn and reinstall, but the grinder is easier.

Follow Ups:

• Re: Re: teeth on flywheel BILL 02:11:49 04/16/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: teeth on flywheel Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]