Re: Transporting tractors

Posted by Kevin (FL) on March 29, 2004 at 13:59:29 from (12.76.73.18):

In Reply to: Transporting tractors posted by Bob on March 28, 2004 at 09:12:13:

Bob,

I use both--chains & binders at the four corners--crossed/diagonally arranged for better holding. Also I use the nylon ratchet-type rigs to go across the torque tube area and if possible I run one through the rear rims, right along the "6-o'clock" position. Learned that trick from a farmer/trucker in South Dakota. I like the nylon straps 'cause they're easy to set up but I've seen too many break or get cut to trust them on my tractors or anyone elses. When I do use the nylon, I now use chaffing gear underneath the straps--where ever they make a hard contact. Haven't parted a strap since I started doing that.

Oh, on the binders and chains, I use copper wire or tie wraps (cable ties) to secure any loose sections of chain and to secure a section of chain around the handle of the chain binder. I started doing this when I had a couple of chain binders "spring open" on rough roads. For long runs I use padlocks to secure the chain section around the chain binders and also to prevent anyone tampering with anything at truck stops, hotels or rest areas.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Transporting tractors Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]