Re: Re: Re: 7.3 PSD chip towing old iron?

Posted by dhermesc on March 23, 2004 at 05:38:11 from (68.110.220.22):

In Reply to: Re: Re: 7.3 PSD chip towing old iron? posted by T_Bone on March 22, 2004 at 21:12:54:

One thing you need to know - if you decide to "chip" the engine you will also need to replace the exhaust system with a more free flowing set up and install an exhaust temp gauge. Adding 70 - 100 hp greatly increases exhaust temps and USING that hp makes it even worse. All that extra heat will shorten the life of your heads - especially the valves. Most of those "chip' set ups are for guys who use their trucks for high end grocery getters.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: 7.3 PSD chip towing old iron? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]