|
Tractor Talk Discussion Board |
Re: Anyone ever added a turbo to a tractor?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by jdemaris on March 06, 2004 at 06:37:30 from (66.218.23.231):
In Reply to: Anyone ever added a turbo to a tractor? posted by Hound on March 05, 2004 at 18:24:55:
You could get into trouble if installing it on a gas engine. It will effective raise the compression ratio, that's why turbos used to be called "altitude compensators." Many gas engines, if factory equipped with a turbo, have lower compression pistons installed then a non-turbo engine. So, these turbocharged engines - when compared to a non-turbo - tend to have less horsepower at low speed, but more at high speeds. The over high compression problems that occur are due to detonation. In modern engines that have electronic engine management, detonation is monitored and computer controlled, so it's not a big issue anymore. With a diesel, the story is a little different. Detonation is not a problem, since the Rudolph Diesel principle is that of "detonation ignition." But, as stated by others, the fuel delivery needs to be increased to benefit. Also, you'll be squeezing more horsepower out of the engine and creating more heat. So, often a better cooling system is needed to compensate, and some engines aren't built heavy/durable enough to handle the extra power. E.g., some engines use conventional square-cut piston rings for naturally aspirated engines, but with turbos they used Keystone rings. As far as lubrication goes, the turbo needs to be tapped into engine full-pressure lubrication. Some applications allow for lubrication even after the engine is shut down. That's because, if you shut off a turbo'd engine, especially if it's running fast, the turbo spins for a long time after the engine stops - so the turbo can burn out from lack of lube. We had some turbos burn out on brand new tractors just from trucking them. Put the tractor on a truck, go down the highway at 70 m.p.h., and the wind blows down the exhaust pipe and spins the turbo and ruins it. That's why the exhaust pipe on a turbo'd engine needs some sort of protection or cover when the machine is being trucked.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Seeing an Old Friend - by Joe Evans. Dad had a concrete contracting business starting in 1960. One of his first pieces of equipment was a Ferguson TO-35 with a Davis loader. Dad replaced the TO-35 with a MF 202 Workbull, essentially an industrialized Ferguson 35 I am told. Dad bought the 202 new in 1962, and I recall quite clearly going to the dealer with him to sign for it.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|