Re: timing marks on a John Deere 820

Posted by david val on March 03, 2004 at 04:19:16 from (80.230.188.76):

In Reply to: timing marks on a John Deere 820 posted by Brian Frank on March 02, 2004 at 17:05:56:

there is a timing mark (deep scrath) on the camshaft gear and one or several marks on the injection pump gear, if there are several marks they are acompanied with a number representing the number of cylinders. timing is done by putting engine at tdc with the timing pin in its cavity in the flywheel, then pointing the timing marks to the center of the crankshaft by using jd special tool or a string, and then installing the idler gear.
david

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: timing marks on a John Deere 820 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]