Re: JD diesel will not start

Posted by david val on February 25, 2004 at 23:41:31 from (80.230.188.76):

In Reply to: JD diesel will not start posted by Eric hendricks on February 25, 2004 at 18:02:05:

there were cases that uncareful use of ether caused shearing of the key of the injection pump gear altering the injection timing. there were other cases that the pistons were damaged. after doing the tests in the other post, you can check timing by removing the timing cover of the pump (small rectungle cover with two small screws, inserting the timing pin in its hole and turning the engine slowly in direction of rotation while pressing the timing pin with a finger until it enters it's hole in the flywheel. when that happens the timing marks in the window should align. if the mark is not seen, rotate the engine another 180 deg. if the marks don't line up, then you're out of time. (i guess a margin of about 1/16 in. is incorrect timing but not a sheared key).
if timing is ok, next step is compression test.
david

Follow Ups:

• Re: Re: JD diesel will not start Eric Hendricks 23:39:38 02/27/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: JD diesel will not start Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]