|
Tractor Talk Discussion Board |
Re: 180 Allis
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jonathan on February 09, 2004 at 18:39:59 from (64.91.163.116):
In Reply to: 180 Allis posted by Rob on February 09, 2004 at 17:30:51:
5th and 6th is weak on the 180. The farmer I work for has one and has to jam a block of wood under the shifter so it can't come out. most 180's have problems with 5 and 6th. The 180 is a pretty decent tractor my boss has a diesel which is a very quiet runner. Check and make sure the parking brake teeth arent badly worn because the one my boss has likes to suddenly release on it's own when the tractor is parked in a hill which is deadly dangerous, so you can't trust the parking brake. I always drive to a level spot if I need to get off the tractor to do something, I'm not saying the parking brake is useless because I still use it everytime I get off the tractor, but it should not be trusted in a hill because it could cost you your life. I'd say $5,500 to $6,000 would kinda be top dollar, but if it was in good shape and the transmission was ok, and had good tires I suppose it wouldn't be too much.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
A Tinker�s Guide to Manifold Repairs - by Curtis Von Fange. A common characteristic of keeping older equipment is that some parts to make repairs can be extremely difficult to locate. For example, finding a replacement for a cracked intake or exhaust manifold on a unique tractor or odd brand can be a frustrating and downright impossible mission. So, what is an alternative solution to scraping out that �one of a kind� piece of history? First, decide if you are one to try a repair yourself or have someone else do it. If you are uncomfortable about
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|