Re: NH 6610 S Proof meter problem

Posted by Rod F. on January 17, 2004 at 17:57:42 from (142.177.94.72):

In Reply to: NH 6610 S Proof meter problem posted by Flurette Farm on January 17, 2004 at 11:28:16:

I'm not sure about the 6610S, but with the older 10's it was usually either a pinched and broken cable, or the cable in the angle drive. Just pop the cable off the angle drive, start her up, and see if it turns. If not, there's the prob, if it does turn, pull the instrument cluster ahead, and disconnect the cable there, and take an end in each hand and check it. At times, there can also be engagement problems on both ends of the cable. Not likely the cluster, but you never know... Good luck.
Rod

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: NH 6610 S Proof meter problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]