Tractor Talk Discussion Board |
Re: not a tractor---but can you help me out??
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on January 12, 2004 at 11:19:43 from (66.163.134.177):
In Reply to: not a tractor---but can you help me out?? posted by Bruce on January 12, 2004 at 07:06:16:
You may have remains of Rodentis Wisonsonis in you cooling fins, or you may have the wrong distributor, or the correct distributor timed wrong for you engine. If the timing is extremely late for the cylinder in question, that may have caused the burned valve, and the overheating problem in that cylinder. Wisconsin used a couple of different crankshafts in the V-4 engines. Some were set up to fire at even intervals, and some were not, so there are two types of cams in the distributors. On the even-fire engines, the 4 cam lobes are equally spaced. On the odd-fire engine distributors, the cam lobes are unevenly spaced so the ignition sparks occur at the proper time for each cylinder. If you have an odd-fire engine set up with an even fire distributor, or an even-fire engine set up with and odd-fire distributor, you're gonna have problems! I don't know a quick way to determine which crankshaft your engine has. Of course, the camshafts are different, also, for the two designs. Maybe someone will post with more info. on this. If you have an odd-fire engine, there is one correct way for the distributor to be timed to the engine in order for the timing to be correct for all 4 cylinders. I am away from the shop for the afternoon, so I can't get the timing procedure for you now, but if no one else posts, email me, and I'll find my Wisconsin VF-4 book when I get back to the shop. The distributor rotor for the odd-fire distributor has a long, curved outer brass end, so the spark from the odd-fire cam will reach the spark plug terminals on the distributor cap with even-spaced terminals. Several days ago, someone was dealing with an odd-fire version posted on this site. Here's the link... http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ttalk&th=355458
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|