Re: Block for Case VAC

Posted by Brandon on January 04, 2004 at 22:26:30 from (216.29.74.102):

In Reply to: Block for Case VAC posted by Bryan G on January 04, 2004 at 21:07:05:

Bryan,

I don't know exactly where you could get a block. Shouldn't be too hard to find. I just wanted to ask, is your block cracked, and is that the reason you want to replace? IF it is cracked, it may be cracked just in the outer water jacket.

If that is correct, the block is fixable if you wanted to try that route. Our '49 VAC had a cracked water jacket from freezing, and my dad was able to fix it up by welding. Nearly every VAC in my area that I've seen (Ohio) has a cracked block on the left side, underneath the carburetor!

Just thought I'd mention it!

Good luck!
Brandon
My Industrial John Deere website
John Deere Diesels
The LaGrange Engine Club

Follow Ups:

• Re: Re: Block for Case VAC Slowpoke 22:09:10 01/05/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Block for Case VAC Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]