Re: case vac

Posted by Dan D. on January 04, 2004 at 17:46:08 from (206.148.228.6):

In Reply to: case vac posted by Art Reed on January 03, 2004 at 15:12:35:

If you need the whole thing, tubes and all you need to research by year the style they used, all where oil bath and a complete assembly shouldn't be hard to find. If you have a cannister and the screen is rusty or degraded from neglect you can install new screen after you pull out the miles of old screen. It can be done, I've been there. Layers of smaller mesh window screen will work. If the bowl is rusted through, clean it up real good and use JB weld to seal it up. Sanded down and painted you can't tell from the outside, but if it holds oil it will work just fine. Good luck, Dan

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: case vac Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]